top of page

Create Your Own Walker Step 5/10 Entry Gates

Typ_B Frame+Text.jpg

KRAFT offers a variety of gates for entering the walking surface and lunging rings. All gates are made from hot dipped galvanized steel with safety closures. The frame is filled with the same materials as the accompanying fence such as spruce or hardwood.

Full Roof Walkers

(With Drivable Inner Area)

  • Type B

Ground Standing & Partial Roof

  • Type A

  • Type C

1. Type B:  Double Panel

                    

  • Double panel gate with wood to match fence

  • Up to 1.5 m (5′) wood

  • From 1.5 m to 2 m (5′ – 6.5′) welded wire grid or tubing

  • 4 m to 6 m (13′ to 20′) wide depending on overall size

  • 10 cm (4″) high threshold

Add Type B To Your Personal Offer

The purpose of the hanging/rotating gates is to create partitions so that multiple horses can safely train at the same time and independent of each other.

​

Hanging/rotating gates motivate horses to walk, provide direction as well as speed. They are designed with the utmost safety standards and offer horses a sufficient range of motion. The hanging/ rotating gates are hung at a height of 2.3 m (7.5′) and are 2.2 m (7′) wide. KRAFT recommends a minimum distance of 7 m (23′) between the gates. The number of partitions depends on the size of the horse walker.

bottom of page